Vacuum Configurations

Vacuum Configurations: Vacuum cleaners are devices that use an air pump to create a partial vacuum to suck up dirt and dust, normally from carpeted floors. Most homes that have carpet floors have a vacuum for cleaning. The dirt that is pulled up from the carpet is collected by a filtering system or a cyclone for later disposal. Let’s read below what Carpet Cleaning Charlotte NC advises us.

Several types of configurations possible for vacuum cleaners

Upright vacuums have the pump mounted directly above the suction intake, with the bag mounted directly on the handle, which will rise to waist height or so. The upright type designs normally employ mechanical beaters which often rotate brushes, to help disturb dust enough to be vacuumed up. These beaters are normally driven by a belt that is attached to the vacuum motor.


Also known as cylinder vacuums, the canister type designs have the motor and bag in a separate canister unit that connects to the vacuum head by a flexible hose. Even though upright units have been tested as being more effective, the lighter and more maneuverable heads of the canister models are quite popular. Some models have power heads, which contain the same type of mechanical beaters found it upright units, although they are driven by a separate electric motor.

Wet vacs/dry vacs

These types a specialized form of the canister vacuum and they can be used to clean up wet or liquid spills as well. They will commonly accommodate both wet and dry soilage, with some being equipped with a switch or exhaust port that reverses the flow of air. This is a very useful function for everything from clearing clogged hoses to blowing dust into a corner for easy collecting.

Back pack vac

These types of vacuums are commonly used for commercial cleaning, as they allow you to move about quickly and efficiently in a large area. They are basically canister vacuum cleaners, except for the fact that straps are used to carry the canister on your back.

Built in or central

These types of vacuum cleaners will move the suction motor and bag to a central location in the building. This provides vacuum inlets at strategic places throughout the entire building. You only need to carry the hose and pickup head from room to room. Although the hose is normally 25 foot long and allows a large range of movement without changing vacuum inlets.

The plastic piping will connect vacuum inlets to the central unit. The vacuum can either be unpowered or have beaters operated by an electric motor or air driven motor. The bag in the central vacuum system is big enough to be emptied or changed sometimes only once a year.

2 thoughts on “Vacuum Configurations”

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.